From: "ioquatix (Samuel Williams)" Date: 2021-10-19T05:30:56+00:00 Subject: [ruby-core:105670] [Ruby master Feature#18020] Introduce `IO::Buffer` for fiber scheduler. Issue #18020 has been updated by ioquatix (Samuel Williams). > mame: I cannot understand what is finally needed. Doesn���t String with ASCII-8BIT work? String is both insufficient and inefficient. You can check how read and write on strings work with internal frozen copies, for example, it's both performance and semantic issue. We can't expose fake string to scheduler which might be one other option, but it has a lot of edge cases. I tried it already. > ko1: I can���t understand how to use it with IO? Only for scheduler? Several examples are given in PR, including new scheduler hooks and tests. Initially only for scheduler, but I believe we should expose to application code. Similar concept exists in Crystal. ---------------------------------------- Feature #18020: Introduce `IO::Buffer` for fiber scheduler. https://bugs.ruby-lang.org/issues/18020#change-94169 * Author: ioquatix (Samuel Williams) * Status: Open * Priority: Normal ---------------------------------------- After continuing to build out the fiber scheduler interface and the specific hooks required for `io_uring`, I found some trouble within the implementation of `IO`. I found that in some cases, we need to read into the internal IO buffers directly. I tried creating a "fake string" in order to transit back into the Ruby fiber scheduler interface and this did work to a certain extent, but I was told we cannot expose fake string to Ruby scheduler interface. So, after this, and many other frustrations with using `String` as a IO buffer, I decided to implement a low level `IO::Buffer` based on my needs for high performance IO, and as part of the fiber scheduler interface. Here is roughly the interface implemented by the scheduler w.r.t. the buffer: ```ruby class Scheduler # @parameter buffer [IO::Buffer] Buffer for reading into. def io_read(io, buffer, length) # implementation provided by `read` system call, IO_URING_READV, etc. end # @parameter buffer [IO::Buffer] Buffer for writing from. def io_write(io, buffer, length) # implementation provided by `write` system call, IO_URING_WRITEV, etc. end # Potential new hooks (Socket#recvmsg, sendmsg, etc): def io_recvmsg(io, buffer, length) end end ``` In reviewing other language designs, I found that this design is very similar to Crystal's IO buffering strategy. The proposed implementation provides enough of an interface to implement both native schedulers as well as pure Ruby schedulers. It also provides some extra functionality for interpreting the data in the buffer. This is mostly for testing and experimentation, although it might make sense to expose this interface for binary protocols like HTTP/2, QUIC, WebSockets, etc. ## Proposed Solution We introduce new class `IO::Buffer`. ```ruby class IO::Buffer # @returns [IO::Buffer] A buffer with the contents of the string data. def self.for(string) end PAGE_SIZE = # ... operating system page size # @returns [IO::Buffer] A buffer with the contents of the file mapped to memory. def self.map(file) end # Flags for buffer state. EXTERNAL = # The buffer is from external memory. INTERNAL = # The buffer is from internal memory (malloc). MAPPED = # The buffer is from mapped memory (mmap, VirtualAlloc, etc) LOCKED = # The buffer is locked for usage (cannot be resized) PRIVATE = # The buffer is mapped as copy-on-write. IMMUTABLE = # The buffer cannot be modified. # @returns [IO::Buffer] A buffer with the specified size, allocated according to the given flags. def initialize(size, flags) end # @returns [Integral] The size of the buffer attr :size # @returns [String] A brief summary and hex dump of the buffer. def inspect end # @returns [String] A brief summary of the buffer. def to_s end # Flag predicates: def external? end def internal? end def mapped? end def locked? end def immutable? end # Flags for endian/byte order: LITTLE_ENDIAN = # ... BIG_ENDIAN = # ... HOST_ENDIAN = # ... NETWORK_ENDIAN= # ... # Lock the buffer (prevent resize, unmap, changes to base and size). def lock raise "Already locked!" if flags & LOCKED flags |= LOCKED end # Unlock the buffer. def unlock raise "Not locked!" unless flags & LOCKED flags |= ~LOCKED end // Manipulation: # @returns [IO::Buffer] A slice of the buffer's data. Does not copy. def slice(offset, length) end # @returns [String] A binary string starting at offset, length bytes. def to_str(offset, length) end # Copy the specified string into the buffer at the given offset. def copy(string, offset) end # Compare two buffers. def <=>(other) end include Comparable # Resize the buffer, preserving the given length (if non-zero). def resize(size, preserve = 0) end # Clear the buffer to the specified value. def clear(value = 0, offset = 0, length = (@size - offset)) end # Data Types: # Lower case: little endian. # Upper case: big endian (network endian). # # :U8 | unsigned 8-bit integer. # :S8 | signed 8-bit integer. # # :u16, :U16 | unsigned 16-bit integer. # :s16, :S16 | signed 16-bit integer. # # :u32, :U32 | unsigned 32-bit integer. # :s32, :S32 | signed 32-bit integer. # # :u64, :U64 | unsigned 64-bit integer. # :s64, :S64 | signed 64-bit integer. # # :f32, :F32 | 32-bit floating point number. # :f64, :F64 | 64-bit floating point number. # Get the given data type at the specified offset. def get(type, offset) end # Set the given value as the specified data type at the specified offset. def set(type, offset, value) end end ``` The C interface provides a few convenient methods for accessing the underlying data buffer: ```c void rb_io_buffer_get_mutable(VALUE self, void **base, size_t *size); void rb_io_buffer_get_immutable(VALUE self, const void **base, size_t *size); ``` In the fiber scheduler, it is used like this: ```c VALUE rb_fiber_scheduler_io_read_memory(VALUE scheduler, VALUE io, void *base, size_t size, size_t length) { VALUE buffer = rb_io_buffer_new(base, size, RB_IO_BUFFER_LOCKED); VALUE result = rb_fiber_scheduler_io_read(scheduler, io, buffer, length); rb_io_buffer_free(buffer); return result; } ``` This function is invoked from `io.c` at various places to fill the buffer. We specifically the `(base, size)` tuple, along with `length` which is the *minimum* length required and assists with efficient non-blocking implementation. The `uring.c` implementation in the event gem uses this interface like so: ```c VALUE Event_Backend_URing_io_read(VALUE self, VALUE fiber, VALUE io, VALUE buffer, VALUE _length) { struct Event_Backend_URing *data = NULL; TypedData_Get_Struct(self, struct Event_Backend_URing, &Event_Backend_URing_Type, data); int descriptor = RB_NUM2INT(rb_funcall(io, id_fileno, 0)); void *base; size_t size; rb_io_buffer_get_mutable(buffer, &base, &size); size_t offset = 0; size_t length = NUM2SIZET(_length); while (length > 0) { size_t maximum_size = size - offset; int result = io_read(data, fiber, descriptor, (char*)base+offset, maximum_size); if (result == 0) { break; } else if (result > 0) { offset += result; if ((size_t)result > length) break; length -= result; } else if (-result == EAGAIN || -result == EWOULDBLOCK) { Event_Backend_URing_io_wait(self, fiber, io, RB_INT2NUM(READABLE)); } else { rb_syserr_fail(-result, strerror(-result)); } } return SIZET2NUM(offset); } ``` ## Buffer Allocation The Linux kernel provides some advanced mechanisms for registering buffers for asynchronous I/O to reduce per-operation overhead. > The io_uring_register() system call registers user buffers or files for use in an io_uring(7) instance referenced by fd. Registering files or user buffers allows the kernel to take long term references to internal data structures or create long term mappings of application memory, greatly reducing per-I/O overhead. With appropriate support, we can use `IORING_OP_PROVIDE_BUFFERS` to efficiently manage buffers in applications which are dealing with lots of sockets. See for more details about how it works. I'm still exploring the performance implications of this, but the proposed implementation provides sufficient meta-data for us to explore this in real world schedulers. -- https://bugs.ruby-lang.org/ Unsubscribe: